Remove one card, test the mechanism again, and reload cards of similar thickness together.

Card ejection is uneven

Check that cards are fully inserted and that the chamber is not overloaded.

Reduce duplicate cards, old receipts, coins, or thick metal cards.

AirTag does not sit flat

Remove it, inspect the holder, then press it back in evenly until secure.

Use a small amount of leather-safe conditioner only when needed and test on a hidden area first.

LORZOR Bifold AirTag Wallet A1 Manual

Product Overview

A full-grain leather bifold wallet with an integrated AirTag holder, RFID-blocking card storage, ID window, exterior quick-access card slots, and hidden cash pockets. It is made for everyday carry with a familiar bifold layout and added tracking support.

Key Specifications

Product type	Bifold AirTag wallet
Primary material	Full-grain leather
Listed color	Vintage Brown
Card storage	10 listed card slots plus ID and hidden storage; use up to 12 cards depending on thickness
Cash storage	Two hidden cash pockets
ID storage	Transparent ID window
Tracking feature	Built-in AirTag holder; AirTag is not included
RFID protection	RFID-blocking card storage as listed
Approx. size	3.15 x 4.53 x 0.4 in
Approx. weight	3.21 oz
Care	Clean with a dry cloth and condition leather only with leather-safe products

Quick Start

Open the bifold and place your ID in the clear window.
Load frequently used cards into the two exterior quick-access slots.
Place additional cards into the inner slots, keeping the total load balanced on both sides.
Slide folded bills into the hidden cash pockets.
Install the AirTag in the holder and press around the holder edge to confirm it is seated before carrying.

Feature Notes

The exterior slots are intended for cards you reach for often, such as transit, office, or everyday payment cards.
RFID protection applies to cards stored in the RFID-blocking areas of the wallet.
The wallet will feel firmer when new and will soften as the leather adapts to your carry pattern.

RFID protection applies to compatible cards stored in the RFID-blocking areas of the wallet. AirTag is sold separately.

Care and Maintenance

Wipe the leather gently with a clean, dry cloth after daily use.
Avoid soaking, machine washing, bleach, alcohol-based cleaners, and long exposure to direct heat.
If the leather becomes damp, let it air-dry naturally at room temperature before storing.
Natural leather may develop marks, color variation, and patina over time. This is part of normal use.

Safety and Use Notes

Do not force extra cards into tight slots. Overloading can stretch the leather and make removal harder.
Check the AirTag holder periodically, especially after travel or heavy daily use.
AirTag is sold separately. Apple and AirTag are trademarks of Apple Inc.

Troubleshooting

Cards feel tight	Remove one card, test the mechanism again, and reload cards of similar thickness together.
Card ejection is uneven	Check that cards are fully inserted and that the chamber is not overloaded.
Wallet feels bulky	Reduce duplicate cards, old receipts, coins, or thick metal cards.
AirTag does not sit flat	Remove it, inspect the holder, then press it back in evenly until secure.
Leather looks dry	Use a small amount of leather-safe conditioner only when needed and test on a hidden area first.

Customer Support

For setup questions, order support, or product help, contact support@lorzor.com. Include your order number, product name, and a clear photo if the question is related to fit, finish, or function.